In addition to the conventional driven toolholders, there are also some special driven toolholders, which can expand the machining range of the turning center;



1. Adjustable Y-axis power tool holder: also known as fake Y-axis power tool holder. For turning centers without Y axis, sometimes we will encounter drilling, slot milling, and milling planes that deviate from the spindle center. We can use eccentricity The driven tool holder (false Y-axis driven tool holder) can adjust the machining plane of the tool, translate it to a specific value along the Y axis, and complete the corresponding processing.



2. Eccentric power tool holder: In the case of insufficient travel in the Y-axis direction, the offset tool holder in the Y-axis direction can compensate the Y-axis travel.



3. Slot-driven tool holder: In the past, this kind of workpiece needs to be completed on a slotting machine or a broaching machine, but now it can be easily completed with this type of tool holder.



4. Gear hobbing power tool holder: For shaft parts, when there is a small section of straight teeth to be processed, the gear hobbing tool holder can be used to complete the processing at one time, which is suitable for processing the tooth profile with a module less than 2.



5. Universal power tool holder: also called adjustable angle tool holder, used for processing inclined holes with different angles


6. Saw blade milling cutter holder: used for high-efficiency processing occasions such as slotting and cutting



7. Double-head tool holder and multi-head tool holder: used for special processing workpieces or double-spindle machine tools. Can greatly improve production efficiency.